Cheap
Computers Guru
|
|
> Making Cheap Computers from Barebone Kits |
| << Home | |
|
Products/Buying Guides |
|
 Computer
Motherboards |
|
| Open
Box Computer Parts |
|
| LCD
computer monitors |
|
| Buying
cheap digital cameras |
|
|
Articles |
|
| Computer
Motherboard Chipsets |
|
| Glossary
of computer Terms |
|
| Building
your own cheap computer Automatically |
|
|
Informations |
|
|
If you heartily, feel that this site has HELPED you, then you may help us indirectly by buying the product you want from our site, you as the buyer would get the same product here for lesser price and we would also get a little profit, this is a win-win for all. This is absolutely optional but it is HIGHLY ENCOURAGED. As you know that building and maintaining FREE sites like this takes time and money to be spent, so some help is required from your side. Without the help FREE Informative sites like this would go into the DARKNESS. We deeply regret for the inconvenience (if any) caused by this text. |
Making Cheap Computers from Barebone Kits
Making
cheap computers from Barebone Kits is even easier than to make it
from cheap computer parts. As you know that the barebone kits come
along with the motherboard, processors and sometimes memories pre-installed
in it, thus making it even easier for anyone to build their own
cheap computer and save money. Buy the best barebone kit to suit
your needs, look at the various buying guides of the components
in our website (by clicking on the name of the parts listed in the
top-left corner of this page) that come pre-installed in the barebone
kits and decide what type of parts should the barebone kit constitute. 1.
Screw Drivers 2.
A pair of tweezers 3.
A roll of self sticking tapes. 4.
A pair of scissors.
Here is the list of the various technical words and what they mean that are used throughout this article. It is strongly recommended to read it thoroughly before jumping in, because you don't want looking at this while you are confused in the depth of this article. 1.
CPU 2.
DIMM 3.
SMPS
Note. throughout this Guide, we'll assume that you are taking proper precaution to ground yourself whenever you are handling electronic components. Always protect your delicate electronic components from static electricity. I've never done it, but a tiny zap of static can totally fry the sensitive innards of a CPU, RAM stick, or even a motherboard, so ground yourself. For discharging yourself from static electricity touch the metal frame of a computer that is running or hook one of those anti-static wrist straps that you can get at any electronics store to your arm, and put the other end on the metal casing of a running computer, so that a charge can't build up between you and the computer you are assembling. That's all you need to start assembling your own computer. Now we take a look at the various steps that should be taken while assembling your computer. Assuming that you are new to assembling computers here is the motherboard close-up from this picture you can know about the various slots into which the various components of the computer are installed. MotherBoard Close-up.
2.
Installing
the various drives. 3.
Finishing
things up. 4.
Installing the Operating System 5.
Troubleshooting your
Computer-1 6.
Troubleshooting
your Computer-2 Note. If you have bought a barebone kit whose motherboard has onboard graphic and/or sound then install only the card that is not onboard.
|
|
Copyright ©2004 Cheap Computers Guru. All Rights Reserved. |